- News and offers
- Indexable milling cutters
- Solid end mills
- Special mills
- Profile cutters
- Solid shell milling cutters and side/face cutters
- Thread milling cutters
- Carbide inserts
- Ceramic inserts
- CBN inserts
- PCD inserts
- Cermet inserts
- Thread turning
- General turning
- Thread cutting tools
- Chamfering and reamers
- Tool Management (RoboCrib)
- Cylinder head
- Valve body
- Steering housing
- PCD tools
- Materials and applications
- Turbine blade machining
- Other industries
- Technical documentation
- Products & Services
- About us
- Contact us
Log in/new user
Unable to log in. Please verify that the provided user name and password are correct.
Create new userForgot password?
Invalid e-mail. Please verify that the provided information is correct.E-mail with a retrieval link to reset your password is send.Sending...CRM users are not allowed to change passwords
Back to loginHave you bought from us before?
Back to loginWe are changing your languageTo give you the best experience, you will now be redirected to the language associated with your customer profile.Change passwordAs a new user, we kindly request you to change your password. When you press OK, you will be forwarded to the “Change password” page.SuccessYour registration request has been sent to Kyocera Unimerco. You will receive an e-mail when your user account has been created.ErrorCould not send your registration request. Please try again or contact Kyocera Unimerco.
Internal grooving with effective chip evacuation
‘When grooving, it is often hard for the tool to divert the chips, meaning the chips are stuck around the tool. The new KGDI tool is designed with a special chip pocket, leaving space between the machined workpiece and the tool, so the chips are easily evacuated from the tool’, says Simon Sondrup.
The tool body is designed with internal coolant, which contributes to effective chip evacuation.
Insert with new chipbreaker
For the new KGDI tool, an insert with new GMI chipbreaker has been developed.
The new KGDI tool for internal grooving from Kyocera has a special chip pocket and a newly developed coolant flow, ensuring effective chip evacuation.
‘The new design of the chipbreaker benefits all applications. That gives you good chip control even in finishing applications with small depths of cut’, says Simon Sondrup.
The inserts are available in various carbide and cermet qualities for steel, stainless steel and cast iron. Insert widths are 2-5 mm and full radius 3-5 mm.
The KGDI grooving tool is supplied with inserts for various carbide and cermet qualities for steel, stainless steel and cast iron.
Call our consultants, who will advise you on choosing the best solution for the task. Call us on 01142 788 787.